Paragraphs

inside BOX

image_print

inside BOX

ISCHELL Pickups

Thank you for purchasing a system ISCHELL. We are delighted to welcome you to the growing number of world-renowned music, technician, audio engineers and artist users who have chosen to use our systems. We are at your disposal and we will always remain so over time, for any question relating to the use of our systems on your instrument. Your complete satisfaction is a priority for us. Consult the online help and contact us if necessary.

  • All our products are manufactured and assembled in France by hand, with the awareness and respect for a job well done, only with high quality components, for products that we hope will bring you satisfaction for many years on stage. , in the studio and at each of your amplified performances.
  • You made the right choice, the model inside BOX is easy to use, it works with 2 CR2032 button batteries (approximately 300 hours) and comes out on Jack asymmetric…
  • We strongly recommend that you take a few minutes to read this manual. Indeed, it is important to respect a few principles in order to benefit simply and quickly from these new systems.

What you need to know

  • Always unplug your instrument before attempting placement again or changing the low cut.
  • This system works with 2 CR2032 batteries for approximately 250 hours of use. FDo a rough calculation of your hours to determine their change. If the level drops, change batteries as soon as possible!
  • Plugging in the OUT jack activates the batteries. Unplug it as soon as you are no longer using your instrument in order to preserve them.
  • Use only mono jacks for in/out connections
  • The batteries are changed using a small pointed object that must be inserted between the two batteries. Lift the top battery slightly to remove it. Do not twist the contact blade excessively, as this may cause it to break! Then insert the new batteries with the + on top.
  • The use of the low cut is not compulsory and depends on the instruments. The 360Hz cut-off is the default position for acoustic instruments, your system is delivered to you in this position. However, if after finding the best position you are running out of bass width, then try 180Hz (Mid Position) or Flat (Full Bandwidth).
  • Operate delicately to act on the low cut. A small pointed object is needed to operate the switches.

Low cut

  • Two small switches are on the BOX allowing three 180Hz / 360Hz / Flat positions.
  • The bottom left switch, the top right one as in the photo cuts the bass below 360Hz (maximum cutoff).
  • To have all the bandwidth (Flat), push the two switches to the right.
  • The 180Hz position is obtained by putting the top switch on the left (the bottom one remains on the right).

Characteristics

  • Model inside BOX ISCHELL
  • Active electronics
  • High pass three positions: 360Hz, 180Hz, Flat
  • unbalanced Jack out
  • Works with two CR2032 button batteries for 300 hours of use
  • Possible fixing of the BOX by Velcro scratch
  • BOX weight: 100 grams
  • Made in France

After-Sales Service

  • Our products are guaranteed against any manufacturing defect for 2 years from the date of purchase.
  • We are at your disposal and we will always remain so in time for any question relating to the use of our systems on your instrument.
  • Your complete satisfaction is a priority for us. Consult the online help and contact us if you cannot find the solution to your problem.
  • Refer to the CGV on www.ischell.com for more information on the warranty.

Contact

ISCHELL MICROPHONES  119 impasse de la gare – 44800 Saint-Herblain – FRANCE

Tel: +33 (0)6 62 09 54 91 – Email: info@ischell.com

Leave comments

Your email address will not be published. Required fields are marked with *