Mandolin Installation X48C1 C2 – C3: Plan your cable tray and system placement. Clean the pasting places. The location of the microphone must be perfectly clean. Then attach the XLR to the splint or behind the instrument with the Velcro or double-sided tape provided. Place the contact microphone in the desired location, a cable tie 3 cm away...
Kora Installation Models X48C / X-Jack / 2X48AC / 2X48CC / CPJ / ACPJ microphone kits Plan your cable path and the placement of the system. The microphone is placed by default inside under the bridge, on the skin. Check that the skin is not fluffy, if necessary sand it with sandpaper to make the place even,...
Miscellaneous Instruments Installation You should find the information relating to your instrument in this knowledge base, however not all the instruments are listed there, so if this is your case, you can take inspiration from the recommendations below, or from the instruments which are similar to yours in their design, or contact us. For ethnic instruments, rare etc... The placement of the microphones is...
Harp Installation Removable systems: C2BHP, C3BHP, X48C / X-Jack / 2X48AC / 2X48+ ACPJ / 2X48CC Systems with microphone kit: CJM / CPJ / ACPJ / CCPJ These systems can be used temporarily outdoors but it is advisable to install them permanently indoors. The sound will be stable between sessions, the microphone will be protected, invisible and your system will be...
Handpan, Hang… Installation Removable systems: X48C / X-Jack / 2X48CC Systems with microphone kit: CJM / CPJ /2X48+CCPJ These systems can be used occasionally outdoors but it is advisable to install them indoors when possible. Sound will be stable between sessions, the mic will be protected, invisible, and your system will be ready to go at all times. Plan...
Gypsy Guitar Installation J48C : Plan your cable route and the placement of the system. Clean the pasting places. The place where the microphone is placed should be clean and smooth. The double-sided transparent provided is quite powerful but can be used on a recent varnish in good condition without damaging it. Experiment. Turn the piece to peel it off. Cut out...
Archtop Jazz Guitar CPJ Pickup Kit, X48C and other versions for archtop Jazz guitar. Installation Plan your cable tray and system placement. Clean the pasting places. The places where the microphone and the connectors are placed must be clean and not greasy. The double-sided transparent provided is quite powerful but can be used on a recent varnish...
Folk Guitar Installing the system on the instrument Model J48C, volume wheel option: The system J48C installs on the guitar in a removable way. Plan your cable route and system placement. Clean the pasting places. The microphone laying place should be clean, smooth and dust-free, lint-free. The supplied double-sided transparent is powerful enough...
Classical guitar, flamenco Installation J48A : Plan your cable route and the placement of the system. Clean the pasting places. The double-sided transparent provided is quite powerful but can be used on a recent varnish in good condition without damaging it. Experiment. Turn the piece to peel it off. Cut out small pieces suitable for the part of the micro kit...
Resonator guitar Positioning of the contact microphone As a reminder, it is important to properly prepare your contact microphone for installation, do not hesitate to read the advice below according to your model: Preparation page for the C1 Original contact microphone Page preparation of contact microphones C2 and C3 We recommend placing the contact microphone...
